Nokia IPSO 4.0 사용자 설명서

Now set up network application platform 2 (Nokia Platform 2). Perform the same steps that you 
performed to configure Nokia Platform 1, with the following changes.

1. Step 18; enter 

 in the Local Address text box.

2. Step 19; enter 

 in the Remote Address text box.

3. Step 24; select 

SITE

_B from the Source Filters drop-down list.

4. Step 25; select 

SITE

_A from the Destination Filters drop-down list.

The following procedure tells you how to configure a sample IPSec authentication connection. 
The following figure shows the network configuration for this example.

1. Click IPSec under Configuration > Security and Access in the tree view of the network 

application platform 1 (Nokia Platform 1, IPSO).

2. Under the Proposals table, enter ah-md5 as a name for a new proposal in the New Proposal 

text box.

3. In the Type field, click AH.

4. Select MD5 from the Authentication Alg drop-down list and None from the Encryption Alg 

drop-down list. 

Click Apply.

5. In the Filters table, enter local as a new filter name in the New Filter text box. 

Enter 

 in the Address text box and 32 in the Mask Length text box. 

Click Apply.

The new entry appears in the Filters table.

6. In the Filters table, enter 

 as a new filter name in the New Filter text box. 

Enter 

 in the Address text box and 32 in the Mask Length text box. 

Click Apply.

Internet

Nokia Platform 1

(IPSO)

PC 1 

192.68.26.74/30

eth-s1p3c0
192.68.26.65/30

00130