Tyco Electronics P5200 사용자 설명서

48 

1.  Using the 

 or 

 key, scroll through the menu until “AlertDst” (Alert Destination) appears. 

2.  Use the 

 or 

 button to scroll through the list of User IDs until the desired destination is displayed 

and press the 

 key. 

3.  Use the 

 or 

 keys to scroll through the available messages until the desired message is displayed. 

4.  Press the 

 key to send the message. 

5.  Observe Status Messages (Table 8-9) to ensure proper delivery. 

When a selective alert message is received by a radio, a four-beep tone is heard. The tone is heard only 
once, but the message “New alert” alternates with the talk group on the main display. Up to 8 received 
messages can be stored. If a ninth message is received, the first (oldest) message is automatically deleted 
to make room for the new message. 

Received messages are displayed with the time and source information.  

To display a Selective Alert Message: 

1.  Using the 

 or 

 button, scroll through the menu items until “Alerts Rcvd” appears. The oldest 

message is displayed and scrolls across the top line of the display. 

2.  The message includes the time, the User ID, and alias of the sender along with the message. 

3.  To view the next message, press the 

 or 

 button to go forward or backwards. 

1.  Display the message. 

2.  Press the 

 key and 

 or 

 to select Y or N. 

3.  At the “Delete? Y” prompt, press the 

 key. The message will be deleted. 

 

Received messages cannot be saved. 

1.  Using the keypad, enter *9, followed by the telephone number being called, and the # key (no dashes 

or spaces).  

*9<telephone number># 

Wait a couple of seconds and press and release the PTT button to initiate the call. An initial ring tone 
will sound to indicate signal call initiation. Once the gateway picks up the call, the ring tone will 
change. Press and hold the PTT and talk normally then release the PTT to listen. 

2.  To hang up the call, press 

 or #

.