Tyco Electronics P5200 사용자 설명서

63 

 

 

The Tri-Color LED changes color to indicate radio status and is visible from both the front and top of the 
radio (see Figure 9-5). The three colors of the LED and the status they represent are:  

Green:  

Receiving. 

Red:  

Unencrypted 

transmission. 

Orange:  

Encrypted transmission (P7200 only). 

During radio operation, various radio Status Messages can be displayed. The messages are described 
below.  
 

 

Call Queued 

Indicates the system has placed the call in a request queue.  

  System Busy 

Indicates the system is busy, no channels are currently available, the 
queue is full, or an individual call is being attempted to a radio that is 
currently transmitting. 

 

Call Denied 

Indicates the radio or talkgroup is not authorized to operate on the 
selected system and/or talkgroup.  

 

Control 
Channel Scan 

Indicates the control channel is lost and the radio has entered the 
Control Channel Scan mode to search for the control channel (usually 
out of range indication). 

 

Wide Area 
Scan 

Indicates the radio has entered the Wide Area Scan mode to search for a 
new system (if enabled through programming).  

 

System Scan 
Features On 

Indicates the System Scan features are enabled.  

System Scan 
Features Off 

Indicates the System Scan features are disabled.  

LOW BATT  Low Battery 

Battery voltage has dropped to the point to where the radio is no longer 
able to transmit. The radio will still receive calls until the battery is 
discharged beyond the point of operation at which time the radio 
automatically shuts down.  

Receive 
Emergency 

Indicates an emergency call is being received. This message will be 
flashing on line two.