Tyco Electronics P5200 사용자 설명서

80 

any index other than 0 or toggle between the two lists by pressing the 

 key. If wrap is enabled, the 

calls received list wraps on itself and not into the other list. 

 

The saved call list shows all ten storage locations. If no calls have been received, the saved call list will be 
empty and the pre-stored list will be available upon entering the individual call mode.  

When in the saved call list, pressing the 

 key toggles the time stamp ON and OFF. The time stamp 

indicates how long ago the call was received. When in the pre-stored list pressing the 

 key toggles the 

Logical IDentification (LID) ON and OFF. 

When the radio receives a telephone interconnect call (a call directed only to the user's radio), it un-mutes 

on the assigned working channel and displays  . The first line displays 

*PHONE*

. The second line 

displays 

*INDV*

. Proceed with the call. Press PTT to talk, release PTT to listen. 

Use the following procedures to initiate and complete a Telephone Interconnect call:  

1.  System Model: To select a previously stored phone number, press 

. Use the 

or 

 keys to 

scroll through the list of stored numbers.  

Scan Model: To select a previously stored phone number, press 

. Use the 

or 

 keys to select 

the menu option 

PHN CALL

. Press the 

 key again then use the 

 or 

 keys to scroll through the 

list of pre-stored numbers.  

2.  Press and release the PTT button. When the radio is clear to transmit,   turns ON,   turns OFF and 

the channel access tone sounds. Line one shows the accompanying name selected from the list of 
stored numbers. The message 

*PHONE*

 displays on line two. The radio then automatically transmits 

the programmed number stored in the special call queue.