Parrot PF520130AA 사용자 설명서

Parrot PARTY 

I used a Jack audio cable
to connect my audio player,
but I get no sound.

- Check that the jack audio cable 
is properly plugged in to the Parrot 
PARTY and audio player.
- Check that there is no Bluetooth 
connection with an audio player. 
The Bluetooth connection will take 
priority over the Jack connection.

My Parrot PARTY makes
a noise when I use
a jack audio cable.

- Check that the jack audio cable 
is properly plugged in to the Parrot 
PARTY and audio player.

I am using my PC as
a Bluetooth audio player,
but there is no sound coming 
from my Parrot PARTY.

- Check that the «Sound 
playback» option is set to  «High-
quality Bluetooth Audio».
You can find this option
by selecting Start/Settings/Control 
panel/Sound and  Audio Devices/
Audio on your computer.

When I watch a video, the 
sound from the Parrot PARTY 
is not synchronised with the 
image.

- Use the Parrot Audio 
Configuration Tool to check
that your system’s audio delay
is correctly configured
for this type of use.

Problem

Solution

No sound is coming through
the Parrot PARTY.

- Ensure that the device is 
switched on (ON/OFF switch 
on the back of the device) and 
sufficiently powered.
- Check that your device supports 
the Bluetooth A2DP profile and 
the source role.

I cannot connect my audio player 
to the Parrot PARTY.

- Hold down the Configuration 
button on the Parrot PARTY for 
two seconds, then restart
the search and connect.

The centre LED on the Parrot 
PARTY is red.

- The red colour means that the 
battery level is low (battery life is 
less than 15 min). Plug the Parrot 
PARTY into the mains: the LED 
turns violet to indicate that the 
device is being charged and then 
turns blue once the battery has 
been fully recharged.