ONKYO DS-A5 사용자 설명서
19
Follow either of the procedures below to perform
your network connection.
your network connection.
Wireless connection
■
Using Wi-Fi Network Login Sharing
Note
• To use this function, iOS version 5 or greater is
required on the following devices.
– iPod touch (3rd and 4th generation)
– iPhone 4S, iPhone 4, iPhone 3GS
– iPad (3rd generation), iPad 2, iPad
– iPod touch (3rd and 4th generation)
– iPhone 4S, iPhone 4, iPhone 3GS
– iPad (3rd generation), iPad 2, iPad
Network Setup
1
Confirm that LED lights up in green.
LED lighting in blue indicates that connection to
network has been completed.
LED lighting in blue indicates that connection to
network has been completed.
Note
• If Ethernet cable is being connected to the
DS-A5, pull the Ethernet cable out after turning
the power of DS-A5 off, and turn the power on
again and make the settings.
the power of DS-A5 off, and turn the power on
again and make the settings.
2
Connect the iOS device connected to Wi-Fi
router (wireless access point) to the DS-A5.
router (wireless access point) to the DS-A5.
3
Press the ENTER button on the remote
controller for five seconds.
controller for five seconds.
Conne
cted
Wi-Fi router