ONKYO DS-A5 사용자 설명서
21
Wireless connection
■
Using Access Point Mode
1
Confirm that LED lights up in green.
LED lighting in blue indicates that connection to
network has been completed.
LED lighting in blue indicates that connection to
network has been completed.
Note
• If Ethernet cable is being connected to the
DS-A5, pull the Ethernet cable out after turning
the power of DS-A5 off, and turn the power on
again and make the settings.
the power of DS-A5 off, and turn the power on
again and make the settings.
2
Press the ENTER button on the remote
controller for five seconds.
The DS-A5 goes into Access Point mode and
wireless connection from your personal
computer enables thanks to the DS-A5’s SSID.
LED blinks in green.
controller for five seconds.
The DS-A5 goes into Access Point mode and
wireless connection from your personal
computer enables thanks to the DS-A5’s SSID.
LED blinks in green.
3
Access the WEB settings menu (
from your personal computer and make
wireless settings.
LED lights up in blue once the connection
completes.
wireless settings.
LED lights up in blue once the connection
completes.
Tip
• You can also display the WEB settings menu by
entering the DS-A5’s IP address “192.168.1.1” in
the browser’s Internet address (URL) field
through Internet browser such as Internet
the browser’s Internet address (URL) field
through Internet browser such as Internet
Explore
®
.