JVC GR-DVL910A 사용자 설명서

 EN

Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 22 and 23.

Set the VIDEO/DSC Switch to “VIDEO”
(GR-DVL910A/DVL510A/DVL910EA/DVL510EA
only), then set the camcorder’s Power Switch to
“

” while pressing down the Lock Button located

on the switch, turn on the VCR’s power, and insert the
appropriate cassettes in the camcorder and the VCR.

[For GR-DVL910A/DVL510A/DVL910EA/DVL510EA
owners only]
Set “S/AV INPUT” to “OFF” in the Menu Screen
(

墌 pg. 50).

Engage the VCR’s AUX and Record-Pause modes.

Engage the camcorder’s Play mode to find a spot just
before the edit-in point. Once it is reached, press 4/
6

 on the camcorder.

Press 4/6 on the camcorder and engage the VCR’s
Record mode.

Engage the VCR’s Record-Pause mode and press 4/6
on the camcorder.

Repeat steps 5 through 7 for additional editing, then
stop the VCR and camcorder when finished.

* Connect when an S-Video cable is not used.
** When connecting the cables, open this cover.

●

As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and
the AUX channel for dubbing purposes.

●

Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they
are being recorded onto the new tape.

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the Menu Screen (

墌

 pg. 50).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Menu Screen (

墌

 

pg. 50).

•Playback Sound Mode, Tape Speed And Tape Running Displays

.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen (

墌

 pg. 50). Or, press DISPLAY on the

remote control (provided).

●

You can use Playback Zoom (

墌

 pg. 60) or Playback Special Effects (

墌

 pg. 59) in step 6.