JVC GR-DVL910A 사용자 설명서
EN
53
* Connect when an S-Video cable is not used.
** When connecting the cables, open this cover.
** When connecting the cables, open this cover.
Dubbing From A VCR
[To use this camcorder as a recorder:
GR-DVL910A/DVL510A/DVL910EA/
DVL510EA only]
GR-DVL910A/DVL510A/DVL910EA/
DVL510EA only]
1
Make sure all units are turned off, then connect the
camcorder and the VCR as shown in the illustration.
Also refer to pg. 22 and 23.
camcorder and the VCR as shown in the illustration.
Also refer to pg. 22 and 23.
2
Set “SOUND MODE” to “12 BIT” or “16 BIT” and
“REC MODE” to “SP” or “LP” in the Menu Screen
depending on your preference (
“REC MODE” to “SP” or “LP” in the Menu Screen
depending on your preference (
墌
pg. 50).
3
Set the VIDEO/DSC Switch to “VIDEO”, then set the
camcorder’s Power Switch to “
camcorder’s Power Switch to “
” while pressing
down the Lock Button located on the switch, turn on
the VCR’s power, and insert the appropriate cassettes
in the camcorder and the VCR.
the VCR’s power, and insert the appropriate cassettes
in the camcorder and the VCR.
4
Set “S/AV INPUT” to “ON” in the Menu Screen to
engage the analogue input mode (
engage the analogue input mode (
墌
pg. 50).
5
Press the Recording Start/Stop Button on the
camcorder to engage the Record-Pause mode.
“
camcorder to engage the Record-Pause mode.
“
AV. IN
” appears on the screen.
6
Engage the VCR’s Play mode, then engage the Still
Playback mode when you have found a spot just
before the edit-in point.
Playback mode when you have found a spot just
before the edit-in point.
7
Press the Recording Start/Stop Button on the
camcorder to engage the Record mode.
camcorder to engage the Record mode.
rotates
on the screen. Engage the VCR’s Play mode.
8
To stop dubbing, press the Recording Star/Stop Button
on the camcorder so that
on the camcorder so that
stops rotating, then
engage the VCR’s Stop mode.
9
Repeat steps 6 through 8 for additional editing.
10
Set “S/AV INPUT” back to “OFF” in the Menu Screen
to disengage the analogue input mode (
to disengage the analogue input mode (
墌
pg. 50).
NOTES:
●
It is recommended to use the AC Adapter as the power
supply instead of the battery pack (
supply instead of the battery pack (
墌
pg. 9).
●
Analogue signals can be converted to digital signals with
this procedure.
this procedure.
●
It is also possible to dub from another camcorder.
VCR (Playback deck)
TV
Audio/Video cable
[mini-plug to RCA plug]
(provided)
[mini-plug to RCA plug]
(provided)
To AUDIO, VIDEO*
and S-VIDEO OUT
connectors
and S-VIDEO OUT
connectors
Connector
cover**
cover**
To AV
To S
S-Video
cable
(optional)
cable
(optional)
Power Switch