JVC LST1108-001A 사용자 설명서
42
Adjust the white balance according to the color temperature
of the lighting. You can select the adjustment mode
according to the shooting conditions.
As the color of the light (color temperature) varies according to
the light source, it is necessary to readjust the white balance
when the main light source illuminating the object changes.
of the lighting. You can select the adjustment mode
according to the shooting conditions.
As the color of the light (color temperature) varies according to
the light source, it is necessary to readjust the white balance
when the main light source illuminating the object changes.
Manual White Balance Mode (Manual
Switching)
Switching)
You can select the white balance with the [WHT.BAL.]
selection switch.
Use the [WHT.BAL.] selection switch to select
selection switch.
Use the [WHT.BAL.] selection switch to select
APRESETB
(preset mode),
AAB (memory A mode), or ABB (memory B
mode).
Memo :
● The [FAW] (Fulltime Auto White balance) function can be
assigned to the [A], [B], or [PRESET] button using
[Switch Set] in the [Camera Function] menu. (A Page 79)
[Switch Set] in the [Camera Function] menu. (A Page 79)
● In [FAW] mode, color temperature of the images is
sampled and white balance is automatically adjusted to
the appropriate level.
the appropriate level.
● When [White Balance] in the [Camera Function] B
[FULL AUTO] menu is set to
AFAWB and the [FULL AUTO]
switch on the camera recorder is set to
AONB, the mode is
fixed at
AFAWB.
䡵 Preset Mode (PRESET)
Two different color temperature settings are registered on
this camera recorder. You can switch between them using
the [AWB] button.
(Default setting:
this camera recorder. You can switch between them using
the [AWB] button.
(Default setting:
A3200KB1A5600KB)
You can change both the color temperature settings in the
Preset mode in the menu.
[Main Menu] B [Camera Process] B [White Balance] menu B
Select either [Preset Temp.] or [Alternative Temp.].
(A Page 85)
Preset mode in the menu.
[Main Menu] B [Camera Process] B [White Balance] menu B
Select either [Preset Temp.] or [Alternative Temp.].
(A Page 85)
1
Set the [W. BAL] switch to
APRESETB.
2
Press the [AWB] button.
Press the [AWB] button to switch to a different color
temperature. (
temperature. (
APreset Temp.B1AAlternative Temp.B)
䡵 Memory A Mode (A), Memory B Mode (B)
Set to the white balance saved in Memory A or Memory B.
When the [WHT.BAL.] selection switch is set to [A] or [B],
press the [AWB] button to execute white balance. The white
balance will be automatically adjusted and the adjusted
value will be saved in Memory A or Memory B.
When the [WHT.BAL.] selection switch is set to [A] or [B],
press the [AWB] button to execute white balance. The white
balance will be automatically adjusted and the adjusted
value will be saved in Memory A or Memory B.
1
Prepare the camera recorder.
A
Set the [POWER] switch to
AONB.
B
Set the iris mode switch of the lens to
AAB (automatic).
C
Set the [FULL AUTO] switch to
AOFFB.
2
Set the [ND FILTER] switch according to the lighting
3
Set the [WHT.BAL.] switch to
AAB or ABB.
4
Locate a place with similar lighting conditions as the
object to be shot, place a white object near the center of
the screen and zoom in to fill the screen with white.
the screen and zoom in to fill the screen with white.
5
Press the [AWB] (Auto White Balance) button.
● The white detection frame appears when Auto White
Balance is activated. Fill the frame with white completely.
● AAUTO WHITE A, B OPERATIONB appears on the
viewfinder when Auto White Balance is activated.
● When the correct white balance is achieved,
AAUTO WHITE A, B OKB appears for about 3 seconds
together with the approximate color temperature.
together with the approximate color temperature.
Note :
● Do not use highly reflective objects, such as metals. Doing
so may result in improper white balance adjustment.
● The Auto White function cannot provide optimum white
balance with an object outside the adjustment range, for
example when it contains only a single color or not enough
example when it contains only a single color or not enough
white color.
Adjusting the White
Balance
Balance
[WHT.BAL.] Selection Switch
[FULL AUTO]
Switch
Switch
[POWER]
Switch
Switch
[AWB] Button
AUTO WHITE A
OK <3200K>
AUTO WHITE A
OPERATION
[AWB] Activating
Result Display
White Detection Frame