JVC GR-D239 사용자 설명서

MasterPage: Start_Right

● The detected blank portion may be located 

between recorded scenes. Before you start 
recording, make sure there is no recorded scene 
after the blank portion. 

 

A

Black to S-VIDEO IN (Connect when your TV/
VCR has S-VIDEO IN and A/V input 
connectors. In this case, it is not necessary to 
connect the yellow video cable.)

B

Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors.)

C

Red to AUDIO R IN**

D

White to AUDIO L IN**

*

If your VCR has a SCART connector, use the 
cable adapter (optional).

** Not required for watching still images only.

Set the video out select switch of the cable adapter 
as required:
Y/C: When connecting to a TV or VCR which 
accepts Y/C signals and uses an S-Video cable.
CVBS: When connecting to a TV or VCR which 
does not accept Y/C signals and uses an audio/
video cable.

Make sure all units are turned off.

Connect the camcorder to a TV or VCR as 

shown in the illustration.

If using a VCR, go to step 

3.

If not, go to step 

Connect the VCR output to the TV input, 

referring to your VCR’s instruction manual.

Turn on the camcorder, the VCR and the TV.

Set the VCR to its AUX input mode, and set 

the TV to its VIDEO mode.

Start playback on the camcorder. (

● Date/Time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. 
(

墌 pg. 22, 27)

● Time Code

Set “TIME CODE” to “ON” or “OFF”. 
(

墌 pg. 22, 27)

● Indications other than date/time and time code

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. 
(

墌 pg. 22, 27)

● It is recommended to use the AC Adapter as 

● To monitor the picture and sound from the 

camcorder without inserting a tape, set the 
camcorder’s Power Switch to “A” or “M”, then set 
your TV to the appropriate input mode.

● Make sure you adjust the TV sound volume to its 

minimum level to avoid a sudden burst of sound 
when the camcorder is turned on. 

2

4

1

3

GR-D239PAL.book  Page 21  Friday, April 22, 2005  11:25 AM