Toshiba IK-WB01A 사용자 설명서

Configure the communication mode

① Click ▼ for the "COM Mode" setting in the right side of the window.
② Select an item from the pull-down menu.

・If you are going to connect the network camera to the network via a

wireless  broadband  router  or  access  point  (AP),  select
"infrastructure." If you are going to connect the network camera
directly to a personal computer, select "adhoc."

Configure the communication channel

① Click ▼ for the "COM Channel" setting in the right side of the window.
② Select an item from the pull-down menu.

・Channels 1 to 11 are available for use. If you are configuring the

network camera to work in an existing wireless LAN environment,
select the same channel.

●

If you cannot establish a satisfied wireless connection, try other channels
and select the channel that enables the optimal connection.

●

To have communication in adhoc method with the computer which cannot
change the communication channel, start up the network camera in wireless
LAN mode before turning on your computer.

●

The network camera can communicate only on the configured channel of
the camera.

Enter the ESS-ID

・If you are connecting the network camera to an existing wireless LAN,

set the same ESS-ID as the existing wireless LAN environment. If you
are configuring a new wireless LAN, make sure that you do not set
the same ID as another existing wireless LAN.

●

There are restrictions on the values you can enter. You can only enter up to
32 alphanumeric characters.

●

ESS-ID is sometimes simply expressed as SS-ID, SSID, or network group
name. In this manual, we use “ESS-ID.”This setting is an ID for identifying
the wireless group when multiple wireless LAN groups exist in the network
environment.

Configure the communication speed

① Click ▼ for the "COM Speed" setting in the right side of the window.
② Select an item from the pull-down menu.

・You can set "1.0," "2.0," "5.5," "11" Mbps, or "auto." It is recommended

to select "auto."