Nikon P7700 사용자 가이드

E52

Shooting Menu (

A, B, C or D Mode)

Re
fere

nce

 Se
cti
o

n

Set the strength of the noise reduction function that is normally performed when 
recording the picture.

Noise reduction filter setting can be confirmed on the monitor when recording a 
picture (

When the camera's built-in ND filter is used, the amount of light that enters the 
camera can be reduced to about one-eighth (equivalent to three steps lower in terms 
of the exposure value) while shooting. Use in situations such as when overexposure 
results from the subject being too bright.

The icon for the current setting other than Off is displayed on the monitor (

C

Using the filter may enable the shooting of subjects that are too bright without overexposing the 
image. It can also be used in situations such as when you want to slow down the shutter speed at a 
low aperture value.
For example, at a shutter speed of 1/2000 second with the correct exposure, if the ND filter is used to 
reduce the light in three steps, the speed can be changed to 1/250 second without changing the 
aperture value.

Rotate the mode dial to 

A, B, C, D, E, F or N M d button M A, B, C or D tab

A10) M Noise reduction filter

Option

Description

e

High

Perform noise reduction at a level higher than the standard 
strength.

M

Normal (default 
setting)

Perform noise reduction at the standard strength.

l

Low

Perform noise reduction at a level lower than the standard 
strength.

Rotate the mode dial to 

A, B, C, D, E, F or N M d button M A, B, C or D tab 

A10) M Built-in ND filter

Option

Description

On

Use the ND filter to reduce the light.

Off (default setting)

The ND filter is not used.