Canon XF200 사용자 설명서

105

Colors Bars/Audio Reference Signal

Colors Bars/Audio Reference Signal

You can have the camcorder generate and record color bars and a 1 kHz audio reference signal and output 
them from the 3G/HD-SDI terminal

1

, MON. terminal

1

, HDMI OUT terminal, AV OUT terminal and × (headphone) 

terminal

2

.

1

 only.

2

Outputs audio reference signal only.

Recording Color Bars

You can choose between EBU color bars and SMPTE standard-definition 
color bars.

1 Open the color bars [Type] submenu.

[~ Camera Setup] > [Color Bars] > [Type]

2 Select the type of color bars and then press SET.

3 Open the [Enable] submenu to activate the color bars.

[~ Camera Setup] > [Color Bars] > [Enable]

4 Select [On] and then press SET.

• The selected color bars appear on the screen and will be recorded 

when you press the START/STOP button.

• Turning the camcorder off or changing the operating mode to 

 

mode will deactivate the color bars.

NOTES

• When you want to display the color bars, set the custom picture file to 

[Off] (A 130) or set the [Other Functions] > [Over 100%] setting in the 
custom picture file to [Through] (A 138).

• If you set an assignable button to [Color Bars] (A 127), you can press the button turn the color bars on/off.

Recording an Audio Reference Signal

The camcorder can output a 1 kHz audio reference signal with the color 
bars.

1 Open the [1 kHz Tone] submenu.

[¡ Audio Setup] > [Audio Input] > [1 kHz Tone]

2 Select the desired level and then press SET.

• Available levels are -12 dB, -18 dB and -20 dB.

• Select [Off] to turn off the signal.

• The signal is output at the selected level and will be recorded when you press the START/STOP button.

Operating modes:

[~ Camera Setup]

[

Color Bars]

[Type]

[EBU]

[~ Camera Setup]

[

Color Bars]

[Enable]

[Off]

[¡ Audio Setup]

[

Audio Input]

[1 kHz Tone]

[Off]

COP

Y