Canon XF200 사용자 설명서

Video Scopes

106

Video Scopes

The camcorder can display a simplified waveform monitor or vectorscope. It can also display an edge monitor*
to help you focus. The video scopes appear only on the OLED screen. They do not appear in the viewfinder or
on an external monitor.

* The edge monitor looks at the focus of the entire picture and displays the results as a waveform. The edge monitor is available

only in

mode.

Displaying a Video Scope

Press the WFM button.

• The waveform monitor will appear in a window on the lower

right of the screen.

• You can repeatedly press the WFM button to activate the

video scopes in the following sequence.

Waveform monitor

Vectorscope Edge monitor Off

• Alternatively, you can display the video scopes using

[w Other Functions] > [WFM (OLED)] > [Setting]. Select
[WFM] for the waveform monitor, [VS] for the vectorscope or
[Edge Mon.] for the edge monitor.

Configuring the Waveform Monitor

The camcorder’s waveform monitor function offers 5 modes. You can also
change the gain.

1 Open the waveform monitor [Type] submenu.

[w Other Functions] > [WFM (OLED)] > [Waveform Monitor] >
[Type]

2 Select the desired option and then press SET.

• If you do not need to change the gain, you do not need to perform

steps 3 and 4.

3 Open the waveform monitor [Gain] submenu.

[w Other Functions] > [WFM (OLED)] > [Waveform Monitor] > [Gain]

4 Select [1x] or [2x] and then press SET.

Options
[Line]:

Sets the waveform monitor to line display mode.

[Line+Spot]: The waveform of the area in the red frame is displayed in red on top of the [Line] mode waveform.

[Field]:

Sets the waveform monitor to field display mode.

[RGB]:

Functions like an RGB parade scope.

[YPbPr]:

Functions like a YPbPr parade scope.

Operating modes:

[w Other Functions]

[WFM (OLED)]

[Waveform Monitor]

[Type]

[Line]

COP