Canon EOS40DBODY 사용자 설명서

100

Using the Built-in Flash

[Approx. meters/feet]

Using the red-eye reduction lamp before taking a flash picture can 
reduce red eye. Red-eye reduction will work in any shooting mode 
except <3> <7> <5>.

 

Under the [1] tab, select [Red-eye 
On/Off] and press <0>. Set it to 
[On], then press <0>.

 

In flash photography, when you press 
the shutter button halfway, the red-
eye reduction lamp will light. Then 
when you press the shutter button 
completely, the picture will be taken.

100

1 - 3.7 / 3.3 - 12.1 1 - 2.3 / 3.3 - 7.5 1 - 3.3 / 3.3 - 10.8 1 - 2.3 / 3.3 - 7.5

200

1 - 5.3 / 3.3 - 17.4 1 - 3.3 / 3.3 - 10.8 1 - 4.6 / 3.3 - 15.1 1 - 3.3 / 3.3 - 10.8

400

1 - 7.4 / 3.3 - 24.3 1 - 4.6 / 3.3 - 15.1 1 - 6.5 / 3.3 - 21.3 1 - 4.6 / 3.3 - 15.1

800

1 - 10.5 / 3.3 - 34.4 1 - 6.6 / 3.3 - 21.7 1 - 9.2 / 3.3 - 30.2 1 - 6.6 / 3.3 - 21.7

1600

1 - 14.9 / 3.3 - 48.9 1 - 9.3 / 3.3 - 30.5 1 - 13.0 / 3.3 - 42.7 1 - 9.3 / 3.3 - 30.5

H: 3200 1 - 21.0 / 3.3 - 68.9 1 - 13.1 / 3.3 - 43.0 1 - 18.4 / 3.3 - 60.4 1 - 13.1 / 3.3 - 43.0

3 

Detach the lens hood and keep at least 1 meter/3.3 feet away from the subject. If the 
lens has a hood attached or you are too close to the subject, the bottom of the picture 
might look dark due to the obstructed flash. If you use a telephoto lens or a fast lens 
and the flash is still partially obstructed, use an EX-series Speedlite (sold separately).

 

The red-eye reduction feature is most effective when the subject looks at the red-
eye reduction lamp, when the room is well lit, or when you go closer to the subject.

 

When you press the shutter button halfway, the viewfinder display on the bottom 
will gradually turn off. For best results, take the picture after this display turns off.

 

The effectiveness of red-eye reduction varies from subject to subject.