Canon EOS40DBODY 사용자 설명서

99

E-TTL II autoflash obtains high-precision and consistent flash shots.

If necessary, the built-in flash will pop-up automatically in low-light 
or backlit conditions. (except in <3> <5> <7> modes)

Regardless of the light level, you can press the <D> button to pop-up 
and fire the built-in flash whenever desired. If the built-in flash has 
popped up, you can push it back down with your fingers.
d

: For fully automatic flash photography. The shutter speed 

(1/ 60 sec. - 1/250 sec.) and aperture are set automatically.

s

: Enables you to set the desired shutter speed (30 sec. - 1/ 

250 sec.). The flash exposure will be set automatically to match 
the aperture that was set automatically.

f

: Enables you to set the desired aperture. The flash exposure 

will be set automatically to match the aperture that was set. The 
shutter speed will set automatically between 30 sec. - 1/250 
sec. to suit the scene’s brightness.
In low light, the main subject is exposed with the automatic 
flash, and the background is exposed with a slow shutter speed 
set automatically. Both the subject and background look 
properly exposed (automatic slow-speed flash sync).

 

With slow shutter speeds, using a tripod is recommended.

 

If you do not want to use a slow shutter speed, set [8C.Fn I 
-7] (Flash sync. speed in Av mode) to [1:1/250sec. (fixed)]. 
(p.155)

a

: You can set both the shutter speed (bulb or 30 sec. - 1/250 

sec.) and aperture. The flash exposure will be set automatically 
to match the aperture that was set. The background exposure 
will vary depending on the shutter speed and aperture.

8

: The flash result will be the same as the <d> mode.