Canon ip3300 사용자 설명서
36
Routine Maintenance
5
Check the print head condition with the printed nozzle check pattern, and take
appropriate action.
appropriate action.
If you click Cleaning on the Pattern Check dialog box that is displayed after printing the nozzle
check pattern, the Cleaning dialog box shown in of step 4-(3) in the following procedure will appear.
check pattern, the Cleaning dialog box shown in of step 4-(3) in the following procedure will appear.
1
Make sure that the printer is on.
2
Open the Front Feeder and extend the Output Paper Support.
3
Open the Canon IJ Printer Utility dialog box.
4
Start Print Head Cleaning.
(1) Make sure that Cleaning is selected in the pop-up menu.
(2) Click Cleaning.
(3) Select the ink group to be cleaned.
(2) Click Cleaning.
(3) Select the ink group to be cleaned.
(4) Click OK.
Print Head Cleaning starts when the POWER
lamp starts flashing green.
Do not perform any other operations until Print
Head Cleaning finishes. This takes about 50
seconds.
lamp starts flashing green.
Do not perform any other operations until Print
Head Cleaning finishes. This takes about 50
seconds.
(5) Load a sheet of A4 or Letter-sized plain paper in the Auto Sheet Feeder and set the
Paper Thickness Lever to the left.
(6) Click Print Check Pattern.
The nozzle check pattern is printed.
Do not perform any other operations until the nozzle check pattern finishes printing.
Do not perform any other operations until the nozzle check pattern finishes printing.
Note
If the problem is not resolved after performing steps 4 and 5 twice, try Print Head Deep Cleaning.
Note
Clicking Initial Check Items displays the items to
be checked before cleaning.
Note
The nozzle check pattern will not be printed correctly if there is not enough ink. Replace the ink
tank if the remaining amount of ink is insufficient.
See “Replacing an Ink Tank” on page 22.
See “Replacing an Ink Tank” on page 22.
(3)
(4)