Panasonic AG-HVX200AP 사용자 설명서

lamp and then hold the button down (for 2 
or more seconds).
The PC lamp now lights, and PC mode is 
established.
When the P2 card is in an accessible status, 
USB (or 1394) DEVICE CONNECT is displayed 
on the camera.
(If DISCONNECT is displayed, you cannot 
operate the camera.)

computer.
An icon for the P2 card contents appears as 
a removable disk in My Computer of your 
computer.
•  For further details, refer to the instructions for 

your computer’s editing software.

•  When replacing one card with another, if 

the USB connection is used, check that the 
access lamp is not flashing and that the data 
on the card is not being accessed before 
ejecting the card. If the 1394 connection is 
used, place the drive icon into the computer’s 
recycle bin before ejecting the card.

•  The unit cannot be operated while in PC 

mode.

•  When the cable is to be disconnected, 

proceed with “Safely Remove Hardware” on 
the computer.

  In the case of a 1394 connection, first 

confirm that “1394 DEVICE DISCONNECT” 
is displayed on the camera-recorder before 
disconnecting the cable. In the case of a USB 
connection, “USB DEVICE CONNECT” will 
remain displayed so check that the card is 
not being accessed before disconnecting the 
cable.

You cannot cancel the PC mode even if 
you press the operation mode button for an 
extended period.

P2 cards are compliant with the Type-II 
standard so you can insert them straight into 
the computer’s card slots and proceed with 
nonlinear editing.
•  The Card Bus driver is contained in the CD-ROM 

provided.