Panasonic KX-TGA931T 사용자 설명서
Useful Information
46
For assistance, please visit http://www.panasonic.com/help
Answering system
The 2nd caller’s information is
not displayed during an outside
call.
not displayed during an outside
call.
L
In order to use Caller ID, call waiting, or Call
Waiting Caller ID (CWID), you must first
contact your service provider/telephone
company and subscribe to the desired
service.
After subscribing, you may need to contact
your service provider/telephone company
again to activate this specific service, even if
you already subscribed to both Caller ID and
Call Waiting with Caller ID services (CWID).
Waiting Caller ID (CWID), you must first
contact your service provider/telephone
company and subscribe to the desired
service.
After subscribing, you may need to contact
your service provider/telephone company
again to activate this specific service, even if
you already subscribed to both Caller ID and
Call Waiting with Caller ID services (CWID).
Problem
Cause/solution
The unit does not record new
messages.
messages.
L
The answering system is turned off. Turn it on
(page 30).
(page 30).
L
The message memory is full. Erase
unnecessary messages (page 31).
unnecessary messages (page 31).
L
The recording time is set to “Greeting
only”. Change the setting (page 35).
only”. Change the setting (page 35).
L
If you subscribe to the voice mail service,
messages are recorded by your service
provider/telephone company not your
telephone. Change the unit’s number of rings
setting or contact your service
provider/telephone company (page 34).
messages are recorded by your service
provider/telephone company not your
telephone. Change the unit’s number of rings
setting or contact your service
provider/telephone company (page 34).
I cannot operate the answering
system.
system.
L
Someone is using the unit. Wait for the other
user to finish.
user to finish.
L
A caller is leaving a message. Wait for the
caller to finish.
caller to finish.
L
The handset is too far from the base unit.
Move closer.
Move closer.
I cannot operate the answering
system remotely.
system remotely.
L
You are entering the wrong remote access
code. If you forgot the remote access code,
store a new remote access code (page 33).
code. If you forgot the remote access code,
store a new remote access code (page 33).
L
Press each key firmly.
L
The answering system is turned off. Turn it on
(page 34).
(page 34).
L
You are using a rotary/pulse telephone. Try
again using a touch-tone phone.
again using a touch-tone phone.
Problem
Cause/solution
TG43xx_OI.book Page 46 Tuesday, December 11, 2007 2:04 PM