Uniden 7000A 사용자 설명서

33

REMOTE OPERATION

REMOTE OPERA

TION

You can operate the DTAM from any remote location using a 

touch-tone phone, or from a rotary phone using a pocket tone-

dialler.

When you hear the OGM, enter your security code.  After a long

beep, enter your remote command code(s).

If you do not hear an OGM, the unit is either in Answer-off mode

or is not setup properly. 

Remote Answer-on
•

Call your telephone (After 15 rings you will hear
"Answer Off")

•

Enter your remote security code within 8 seconds.
(The DTAM beeps to confirm valid code)

•

Enter  

for OGM1 or  

for OGM2 (Announce only)

•

The DTAM announces "Answer On’,
Then plays your selected OGM.

NOTE: •

An outgoing message must be recorded before you can remotely
set the DTAM to answer calls.

•

If you do not enter each digit of the security code within 8 seconds,
the DTAM hangs up.  If the DTAM is set to answer-on, it answers
according to the number of rings you set. The DTAM plays OGM1.