Lorex Technology LH130 사용자 설명서

Basic Setup

Step 4: Connect the Monitor

• Connect a HDMI cable (included with 8/16-channel models only) from the HDMI port to the

TV or monitor (recommended) OR;

• Connect a VGA cable (not included) from the VGA port to the monitor.

NOTE: If you have a monitor with a DVI input, you must use an HDMI to DVI adapter (not included).

You cannot use an DVI to VGA adapter.

Step 5: Connect the Power Adapter and Power on the DVR

• Connect the included power adapter to the DC 12V port. Connect the end of the power adapter

to a wall socket or a surge protector.

• Turn the power switch to I to turn on the DVR. At startup, the system performs a basic system

check and runs an initial loading sequence. After a few moments, the system loads a live
display view.

Step 6: Verify Camera Image

• Power on the cameras, and then verify the camera video quality before mounting the cameras

to a permanent location.

• Mount the cameras under a sheltered location. Always verify the outdoor rating of your camera

before installing it in a permanent location.

Step 7: Set the Time

• Set the system time and date for accurate video time stamps. Videos with inaccurate times

may not be valid as surveillance evidence.

HDMI

VGA

8-channel model shown

DC 12V port