Generac Power Systems H-100 사용자 설명서

Generator control is limited to the following output 
options (referred to as “Hooks”).

1. Use 

Keyswitch

2.  Force Off – cleared with “Use Keyswitch” hook
3.  Force Manual – cleared with “Use Keyswitch” 

hook

4.  Force Auto – cleared with “Use Keyswitch” hook
5. Force 

Dialout 

6. Halt 

ILC

7.  Force Alarm/Warning #1
8.  Force Alarm/Warning #2
9.  Force Remote Start
For detail in programming the ILC, refer to the ILC 
manual.

The front panel display consists of two LCD displays 
that are 4 rows of 20 characters each and a key pad 
with seven buttons and two LEDs.

The left display is used to display a “fixed” set of 
parameter pages and has no cursor or entry fields. 
The key pad has no direct control of its contents. Its 
contents are determined by a menu selection on the 
right display.

The right display has several pages and responds 
directly to the key pad. There are two “quick” buttons 
on the key pad that are used to go directly to either 
the Home page or the Menu page. The Enter button 
is used to enter and exit edit mode, operate an out-
put override, or select another page. When not in edit 
mode, the arrow buttons are used to navigate around 
the page to either an edit field or a control field. 
When in edit mode, the up/down buttons slew up or 
down through the available values and the right/left 
buttons are used to change to a different digit or edit 

‹

‹

field. Moving off an edit field while in edit mode auto-
matically enters the value displayed. Also, while in 
edit mode, pressing the Home button will return the 
parameter to the last value entered.

The left display has five “fixed” parameter pages: 
System Voltages, System Power, Transfer Switch 
Mimic Diagram, Generator Frequency Graph, and 
System Alarm Log. A sixth page is selectable, but has 
no function at this time. The left display page is deter-
mined by selecting the right display menu item, “Left 
Display”. To change the left display, do the following:

Press the “MENU” button.

Press the 

 button to move to the “Left Display” 

field.

Press the “ENTER” button to display the “Left 
Display” menu page.

The “>…..<” indicates which page is currently dis-
played on the left display. Use the arrow buttons to 
move the cursor to the desired page name and press 
the “ENTER” button. The left display will change 
to the new page and the “>…..<” will move to the 
selected page name.

‹

  

11