Generac Power Systems H-100 사용자 설명서

  

33

Use the up and down arrow key until a “Y” appears.

Press the “ENTER” button to exit edit mode.

Setup of Normal Exercise with transfer to load dur-
ing exercise is now complete. For this example, exer-
cise will start every Wednesday at 10:30 AM and run 
until about 10:50 AM. However, the HTS settings may 
change this time.

While normal exercise is running, the “Time 
Remaining” will display the approximate number of 
minutes left before exercise is completed.

The H-100 Control Panel contains a real time clock to 
keep track of date and time. This is used to schedule 
internal exercise, time stamp alarm/event log entries, 
and time stamp reports. The date and time can be 
changed using either GenLink or the front panel 
display.

Connect to the H-100 control panel.

The date and time field is displayed in the lower left 
corner of the screen.

Using the mouse cursor, click on the date and time 
field.

Any of the fields are editable. Note that hours are 
entered as 0 – 23. If the PC being used has reliable 
date and time settings, pressing the “Synchronize 
with PC!” button will copy the PC date and time into 
the H-100 Control Panel. Otherwise, press “Apply” 
after making changes. The date and time on the 
GenLink screen may take a few seconds to update.

Press the “MENU” button.

‹

‹