Gianni Industries DG-100 사용자 설명서

DG-100 Split Digital Keypad Entry system

Operation User's Manual (4 Codes)

1. Product Characteristic:

Allows up to 99 PIN codes

Random user codes for anti-peeping

Fully Programmable via keypad and master code

LED display with audible indication

Non-Volatile

Memory

Invalid PIN Lock-out

Metal die casting housing

Deftly dimension for narrow jamb

With vandal resistant screws

Split of controller and reader for high security.

2. Specifications:

Operating Voltage: 12 Vdc

Current Draw: Average 15mA, Peak 70mA @ 12Vdc

Output: N.O./N.C./Com. Output (free voltage contact)

Relays Rated: 2A MAX @30Vdc ；0.4A @ 120Vac

Relay Activation Time: （＊100）

Strike Time: 1~99 seconds（adjustable）

Strike mode: Access Timer or Latch

PIN codes: 4 digit codes

User codes capacity: 99 slots

Operating Temperature: -20~+70℃

Ambient Humidity: 5~95% relative humidity non-condensing

Factory Master Code: 1234

Invalid PIN Lock-out: The system will shut down for 60 seconds while 30 codes of
incorrectly Master Codes enrolled or PIN codes attempted（None beeper signal of
keypad activations）.

EPROM: Non-volatile memory, System will retain all programs and codes after a total
loss of power.

Color:

Beige

White

Distance between the keypad and controller board: Maximum 50 M (cable#22~26 AWG).

3. The indicator signal chart:

Sound and LED indicator:

Green LED

Relay activated

Red LED

Power on, stand-by

LED signal

Yellow LED

Programming mode

1 Beep

Key-in, Effective PIN codes

2 Beeps

Entering 、Exiting from the Program mode

3 Beeps

Data computing error 、 other operation mistakes

Sound signal

5 Beeps

Master Code reset to Factory （ 1234 ） or remove all
stored user codes