Gianni Industries DG-100 Manual De Usuario
Copyright © Gianni Industries, Inc. All Rights Reserved.
P-MU-DG100-4C Ver. B Published on 2007.09.20 Page: 1/ 3
P-MU-DG100-4C Ver. B Published on 2007.09.20 Page: 1/ 3
DG-100 Split Digital Keypad Entry system
Operation User's Manual (4 Codes)
1. Product Characteristic:
Allows up to 99 PIN codes
Random user codes for anti-peeping
Fully Programmable via keypad and master code
LED display with audible indication
Non-Volatile
Memory
Invalid PIN Lock-out
Metal die casting housing
Deftly dimension for narrow jamb
With vandal resistant screws
Split of controller and reader for high security.
2. Specifications:
Operating Voltage: 12 Vdc
Current Draw: Average 15mA, Peak 70mA @ 12Vdc
Output: N.O./N.C./Com. Output (free voltage contact)
Relays Rated: 2A MAX @30Vdc ;0.4A @ 120Vac
Relay Activation Time: (*100)
Strike Time: 1~99 seconds(adjustable)
Strike mode: Access Timer or Latch
PIN codes: 4 digit codes
User codes capacity: 99 slots
Operating Temperature: -20~+70℃
Ambient Humidity: 5~95% relative humidity non-condensing
Factory Master Code: 1234
Invalid PIN Lock-out: The system will shut down for 60 seconds while 30 codes of
incorrectly Master Codes enrolled or PIN codes attempted(None beeper signal of
keypad activations).
incorrectly Master Codes enrolled or PIN codes attempted(None beeper signal of
keypad activations).
EPROM: Non-volatile memory, System will retain all programs and codes after a total
loss of power.
loss of power.
Color:
Beige
White
Distance between the keypad and controller board: Maximum 50 M (cable#22~26 AWG).
3. The indicator signal chart:
Sound and LED indicator:
Green LED
Relay activated
Red LED
Power on, stand-by
LED signal
Yellow LED
Programming mode
1 Beep
Key-in, Effective PIN codes
2 Beeps
Entering 、Exiting from the Program mode
3 Beeps
Data computing error 、 other operation mistakes
Sound signal
5 Beeps
Master Code reset to Factory ( 1234 ) or remove all
stored user codes
stored user codes