Thermo Products OD6FX072DV5R 사용자 설명서

 

 46 

 

1. Turn the main service switch to "OFF" position. 

2. Set thermostat substantially above room temperature. 

3. Open shut-off valves in oil supply line to burner. 

4. Turn service switch to furnace "ON". If burner starts and runs, but stops again on lockout, it may be 
necessary to bleed the lines or make burner combustion air adjustments. Contact a qualified service 
person to adjust and start burner.  
 

 

c

WARNING:    To avoid injury from moving parts, hot surfaces, or electrical 

shock, shut off the power to the furnace before removing any furnace access 
doors to service the air filters. 

 
The air filters should be inspected each month and cleaned when dirty. Cleaning the air filters frequently 
may reduce airborne contaminants from entering the furnace and depositing in the furnace, duct system 
and home. 
 

 

FILTER

FILTER

 

RACK

 

RIGHT, BLOWER

ACCESS DOOR

PLENUM

 

REMOVE RIGHT BLOWER ACCESS
DOOR TO ACCESS FILTERS.

AFTER INSPECION AND/OR

CLEANING OF FILTERS RE-INSTALL
FILTERS AND ACCESS DOOR.