Honeywell L4007 사용자 설명서

L4006,7,8; L6006,7,8 AQUASTAT

CONTROLLERS

60-2104—10

MATERIAL SAFETY DATA SHEET

Section 1. Product And Company

Identification

Product Name: Heat Conductive Compound

MSDS ID: DS9021

Synonyms: MS1699

Product Use: Heat conductive material used to enhance

contact and heat transfer in temperature sensor applications.

Manufacturer: Honeywell Inc., 1985 Douglas Drive North,

Minneapolis, MN 55422.

Date Released: October 8, 1999

NFPA Ratings:

Health 0; Flammability 1; Reactivity 0; Personal Protection B

Section 2. Composition,

Information on Ingredients

Additional Information: Part No. 120650 (0.5 oz tube); Part No. 107408 (4 oz can); Part No. 197007 (5 gallon container). May also

contain minute amounts of lithium and molybdenum lubricant compounds.

Section 3. Hazard Identification

Acute Health Effects:

Skin: Excessive contact may cause skin irritation and

dermatitis.

Eye: Direct contact with eye will cause irritation.

Inhalation: No adverse effects are expected.

Ingestion: Ingestion of product may cause nausea, vomiting

and diarrhea.

Chronic Health Effects:

Existing skin rash or dermatitis may be aggravated by

repeated contact.

OSHA Hazard Classifications: None.

Carcinogenicity: Not considered to be a carcinogen by

either OSHA, NTP, IARC, or ACGIH.

Section 4. First Aid Measures

Eye Contact: Flush eyes with water for 15 minutes. Remove

any contact lenses and continue to flush. Obtain medical

attention if irritation develops and persists.

Skin Contact: Remove excess with cloth or paper. Wash

thoroughly with mild soap and water. Obtain medical

attention if irritation develops and persists.

Ingestion: Contact physician or local poison control center

immediately.

Inhalation: Remove patient to fresh air and obtain medical

attention if symptoms develop.

Section 5. Fire Fighting Measures

Material Flash Point: > 383° F (195° C). Will burn if exposed

to flame.

Extinguishing Media: Carbon dioxide, dry chemical or foam.

Special Fire Fighting Procedures: None.

Explosion Hazards: None. Aluminum powder can react with

water to release flammable hydrogen gas. In this form of the

product, this reaction is not expected.

Ingredient

CAS Number

Percent

PEL

TVL

#2 Lithium Complex Grease (70%):
Mineral Oil

64742-65-0

35-50

5 mg/m

Mineral Oil

64742-62-7

20-25

5 mg/m

Lithium Hydrostearate/Sebacate

Complex

68815-49-6

4-9

—

Zinc Alkyldithiophosphate

68649-42-3

0-2

—

Aluminum Paste (30%):
Aluminum, as Al

7429-90-5

20-25

15 mg/m

10 mg/m

Aliphatic Petroleum Distillates

8052-41-3

10-15

2900 mg/m

525 mg/m

Stearic Acid

57-11-4

1-2

—

Aromatic Petroleum Distillates

64742-95-6

1-2

5 mg/m