Marantz CDR632 사용자 설명서

 

Even after audio data is recorded on a CD-R or CD-
RW disc, it cannot be played back on a conventional 
CD player until the final TOC

 

(*)

 

 data has been 

recorded on the disc. The process of recording this 
TOC data is called “finalizing”.
No further recording can be performed on a finalized 
disc. However in the case of a CD-RW, the disc can be 
“un-finalized” to allow additional recording (

 

→

 

 p.31).

* TOC: Table of Contents = information about the 

recorded data, such as the number and playing 
times of the songs

 

• Remote control operations may not be possible if 

the remote control receiver is in direct sunlight or 
under intense illumination.

• Please be aware that operating the remote control 

unit may cause unintended operations to occur on 
other infrared-controlled equipment.

 

Open the cover on the back panel of the remote con-
trol unit, and install two batteries (AAA size) in the 
correct orientation as indicated by the “+” and “-” 
markings on the case.

 

If the range of control has lessened, or if pressing a 
button does not produce an operation, please replace 
both batteries with new ones.

 

Incorrect use of batteries may cause leakage or burst-
ing. Please carefully read and observe the following 
cautions.

• Be sure to insert the batteries in the correct orien-

tation as indicated by the “+” and “–” markings 
on the battery case.

• Do not mix new batteries with old batteries, or 

batteries of differing types.

• Never attempt to recharge batteries.
• Remove the batteries if you won’t be using the 

remote control unit for an extended period (more 
than one month).

• If leakage occurs, carefully wipe off any liquid 

from inside the case and install new batteries.