Integra DHC-9.9 사용자 설명서

50

Notes:
• If the video source contains information that restricts 

output at high-resolutions, 720p or 1080i content will 
not be converted.

• See page 30 for charts showing how the “Monitor 

Out” and “Resolution” settings affect the video signal 
flow through the AV controller.

• This procedure can also be performed on the AV con-

troller by using its [Setup] button, arrow buttons, and 
[Enter] button.

If you connect a video component to an HDMI IN, you 
must assign that input to an input selector. For example, 
if you connect your DVD player to HDMI IN 1, you 
must assign HDMI IN 1 to the DVD input selector.

By default, none of the HDMI inputs are assigned.

If you’ve connected your TV to the AV controller with 
an HDMI cable, you can set the AV controller so that 
composite video, S-Video, and component video sources 
are upconverted

*

 and output by the HDMI outputs. You 

can set this for each input selector by selecting the “- - -” 
option.

q]/[w] but-

e]/[r] 

Select this to pass video through the 
AV controller at the same resolution 
and with no conversion.

Select this to have the AV controller 
automatically convert video at reso-
lutions not supported by your TV. 
(Not available when the “Monitor 
Out” setting is set to “Analog”.)

Select this for 480p output and 
video conversion as necessary.

Select this for 720p output and 
video conversion as necessary.

Select this for 1080i output and 
video conversion as necessary.

Select this for 1080p output and 
video conversion as necessary. (Not 
available when the “Monitor Out” 
setting is set to “Analog”.)

Output will be according to the res-
olution level which was set with 
Resolution inside Source: 
4-4. Picture Adjust. (Setting for 
each Source becomes possible.)

q]/[w] but-

e]/[r] buttons to select:

Select this if you’ve connected the 
COMPONENT VIDEO MONI-
TOR OUT 2/ZONE 2 OUT to a TV 
or other component in your main 
room.

Select this if you’ve connected the 
COMPONENT VIDEO MONI-
TOR OUT 2/ZONE 2 OUT to a TV 
in Zone 2.

When Monitor is selected, the COM-
PONENT VIDEO MONITOR OUT 
2/ZONE 2 OUT outputs the same video 
as the COMPONENT VIDEO MON-
ITOR OUT 1.

Press the [Setup] button.
Setup closes.

Enter

Enter

Enter

Enter

Setu

p

Press the [Receiver] button, fol-
lowed by the [Setup] button.
The main menu appears onscreen.

If the main menu doesn’t appear, make 
sure the appropriate external input is 
selected on your TV.

q]/[w] but-

tons to select “1. Input/Output 
Assign”, and then press [Enter].
The “Input/Output Assign” menu 
appears.

Composite video, S-Video, 

component video

Composite video, S-Video, 

component video

HDMI

HDMI

Receiver

Setu

p

Enter

Enter