Integra DHC-9.9 사용자 설명서

51

Notes:
• For composite video, S-Video, and component video 

upconversion for the HDMI OUT MAIN or HDMI 
OUT SUB, the “Monitor Out” setting must be set to 
“HDMI Main” or “HDMI Sub”, respectively (see 

page 49), and the “HDMI Input” setting must be set to 
“- - -”. See page 29 for more information on video sig-
nal flow and upconversion.

• When an HDMI IN is assigned to an input selector as 

explained here, the digital audio input for that input 
selector is automatically set to the same HDMI IN. 
See “Digital Audio Input Setup” on page 53.

• The “TUNER” input selector cannot be assigned and 

is fixed at the “- - -” option.

• This procedure can also be performed on the AV con-

troller by using its [Setup] button, arrow buttons, and 
[Enter] button.

q]/[w] but-

tons to select “2. HDMI Input”, 
and then press [Enter].
The “HDMI Input” menu appears.

q]/[w] but-

e]/[r] buttons to select:

Select the HDMI IN to which the 
video component has been con-
nected.

Output composite video, S-Video, 
and component video sources from 
the HDMI Out. The video output 
signal from the HDMI Out is the 
one configured in “Component 
Video Setup” (see page 52).

Each HDMI IN cannot be assigned to 
more than one input selector. When 
HDMI1 - HDMI4 have already been 
assigned, you must set first any unused 
input selectors to “- - -” or you will be 
unable to assign HDMI1 - HDMI4 to 
input selector.

Press the [Setup] button.
Setup closes.

Enter

Enter

Enter

Enter

Setu

p