Technics SA-DA10 사용자 설명서

다운로드
페이지 52
RQT5518
48
1
A
B
2
1
2
TAPE MONITOR
VCR 3
INPUT SELECTOR
VCR 2
VCR 3
TAPE MONITOR
Making a recording
Note
¡
You cannot record a source connected through a digital
terminal.
¡
When recording CD, DVD, or TV, ensure the source is connected
through the corresponding analogue terminals (
a
 pages 10–12)
and “ANALOG” input is selected (
a
 page 22).
¡
When  you select DVD 6CH INPUT mode, only sound from the
front left and right channels is recorded.
Recording on a tape deck or VCR
You can record to a tape deck connected to TAPE REC (OUT) or
to a VCR connected to VCR 1 OUT.
See the recording unit’s operating instructions for details on how
to prepare it for recording.
When recording with a tape deck, you can record any source
except TAPE.
When recording with a VCR, you can record any source except
TAPE or VCR 1.
Note
Recording from the tape deck to the VCR is not possible.
1
Turn [INPUT SELECTOR] to select the
source to be recorded.
2
If you selected VCR 2 in step 1, set
[
VCR 2, 
 VCR 3] to the required
position.
3
Begin recording.
Follow your recording unit’s operating instructions.
4
Begin the source to be recorded.
Follow your equipment’s operating instructions.
To monitor sound being recorded onto a tape deck
It is possible to check the sound being recorded if your tape deck
is a 3 head system.
Press [TAPE MONITOR] on this unit and
set the monitor button on the tape deck to
“TAPE”.
Press [TAPE MONITOR] once again to turn it off.
For your reference
Use the VCR 3 terminals on the front of the unit when dubbing
from a video camera.
A
B