Technics SA-DA10 사용자 설명서
![Technics](https://files.manualsbrain.com/attachments/04086132fd24ddf641208221533537c2663cf036/common/fit/150/50/29f53b665d6f4598344e58741c609020a7a488dc5535961ae5617a1b9f7f/brand_logo.gif)
RQT5518
50
Troubleshooting guide
Before requesting service for this unit, check the chart below for a
possible cause of the problem you are experiencing. Some simple
checks or a minor adjustment on your part may eliminate the
problem and restore proper operation.
possible cause of the problem you are experiencing. Some simple
checks or a minor adjustment on your part may eliminate the
problem and restore proper operation.
If you are in doubt about some of the check points, or if the
remedies indicated in the chart do not solve the problem, refer to
the directory of Authorized Service Centers (enclosed with this
unit) to locate a convenient service center, or consult your dealer
for instructions.
remedies indicated in the chart do not solve the problem, refer to
the directory of Authorized Service Centers (enclosed with this
unit) to locate a convenient service center, or consult your dealer
for instructions.
Problem
Probable cause(s)
Sound is not heard from
the center, surround or
subwoofer speakers.
the center, surround or
subwoofer speakers.
The presence setting of the speaker has
been incorrectly set to “NONE” or “NO”.
been incorrectly set to “NONE” or “NO”.
While enjoying the surround sounds
¡
Set the type and presence setting of each
speaker correctly.
speaker correctly.
Hiss is heard during
stereo broadcasts, but not
during monaural ones.
stereo broadcasts, but not
during monaural ones.
Excessive noise in both
stereo and monaural
broadcasts.
stereo and monaural
broadcasts.
“STEREO” and “TUNED”
indicators flicker.
indicators flicker.
Stereo broadcasts highly
distorted.
distorted.
Modulation for the two types is different so
some noise may be heard during stereo
broadcasts.
some noise may be heard during stereo
broadcasts.
Antenna location and direction poor.
Station is distant.
Antenna location and direction poor.
Station is distant.
Building or mountain nearby.
¡
Reduce the treble.
¡
Change the location and direction of the
antenna.
antenna.
¡
Use an outdoor antenna.
¡
Use an antenna with more elements.
25
12, 13
13
–
¡
Change the location and direction of the
antenna.
antenna.
¡
Use an outdoor antenna.
¡
Use an antenna with more elements.
Unusual “beat”sound is
heard.
heard.
Low-pitched “hum” is
heard when a station is
tuned.
heard when a station is
tuned.
A continuous or
intermittent hiss is heard.
intermittent hiss is heard.
A television is on nearby.
Adjacent signal is interfering.
AC mains lead is near the antenna wires.
Electronic interference from the AC mains
lead is fed to the speakers.
lead is fed to the speakers.
Interference from other appliances.
¡
Separate the two or turn the television off.
¡
Reduce the treble.
¡
Separate the AC mains lead from the
wires.
wires.
¡
Use an outdoor antenna.
¡
Separate this unit from such appliances.
While listening to AM broadcasts
While listening to FM broadcasts
¡
Select “VGCA ON”.
¡
Select “VGCA ON”.
The DSP sound mode has been incorrectly
set to “STEREO”.
set to “STEREO”.
¡
Set to SURROUND mode.
SURROUND and SFC
cannot be selected.
cannot be selected.
VGCA is ON.
¡
Select “VGCA OFF”.
Page(s)
27
12, 13
13
–
–
25
27
–
13
–
17, 18
22
27
Cannot play Dolby Digital
or DTS sources.
or DTS sources.
The PCM FIX mode may be on.
An SFC mode is on.
SPEAKERS B is on.
¡
Turn SPEAKERS B off.
22
¡
Turn PCM FIX mode off.
¡
Switch to SURROUND or STEREO mode.
21
20
The DTS FIX mode may be on.
¡
Turn DTS FIX mode off.
21
An AM broadcast station
cannot be picked up clearly.
cannot be picked up clearly.
Frequency step is set to 10 kHz.
¡
Hold down [BAND] for about 3 seconds.
This changes the frequency step to 9 kHz.
This changes the frequency step to 9 kHz.
28
Suggested remedy