Russound CAV6.6 사용자 설명서

50

The following items make up the Installation Menu:  

Source Setup allows the system’s sources to be configured. 

The following items can be found in the SOURCE SETUP menu:  

NOTE: The BASIC SETUP procedure should be performed for each source before proceeding to other
source setting changes. 

This procedure uses built-in source “templates” to quickly and easily configure the source settings
needed for basic operation of the source component. Before performing BASIC SETUP, connect the
source components to the CAV 6.6 as outlined in the Source Connections section. Also be sure that
all sources are powered on. 

1. SOURCE NUM – 

Select the source to be configured.

(Src #)

2. SOURCE NAME – 

Select the name for the source (e.g., DVD, Aux 2, Jazz, etc.).

(Name)

3. COMMAND TYPE – 

Select the type of command template (e.g., CD, TV, etc.). Selecting 

(CmdTp)       

the command type template will tell the CAV 6.6 how to configure the 
key’s command and text for the source component. 

Choose Learned IR if the pre-programmed IR code library does 

(LrnIR)

not support the source component.

Select the learned source bank to be assigned to the source 

(LnSrc)

component. (See Learning IR procedure for instructions on how 
to learn IR codes.)