Russound CAV6.6 사용자 설명서

52

2. SOURCE NUM – 

Select the source the key will be configured for.

(Src #)

3. SELECT A KEY – 

Using 

or 

, select the keypad key to be configured.

(SelKy)

4. KEY TYPE – 

Either “Key Press,” “Key Hold” or “Both” will activate the command.

(KeyTp) 

5. KEY NAME – 

Name that appears on the keypad display when the command is 

(KeyNm)

activated. 

6. COMMAND TYPE – 

Select the type of source command (e.g., CD, TV, etc.). 

(CmdTp)

a. Selected: Learned IR –

Choose Learned IR if the pre-programmed IR code library does 

(LrnIR)

not support the source component.

Select the learned source bank to be assigned to the source 

(LnSrc)

component. Procedure advances to KEY FUNCTION (step 8)

The key configuration is cleared. Procedure advances to SAVE 

(Unasg)

CHANGES (step 9)

Default selects the same device type and device code previously

(Deflt)

setup in BASIC SETUP. Procedure advances to KEY FUNCTION 
(step 8)

i. MACRO - 

Macro loads a series of commands which are processed when 

(Macro)

activated.

ii. MACRO ID – 

Enter the macro ID number. Menu advances to SAVE CHANGES 

(MacID)

(step 9)

Procedure advances to DEVICE CODE (step 7)

Enter source component code number listed in this manual’s 

(DevCd)

Reference section. 

8. KEY FUNCTION – 

Select a function for the button.

(KeyFn)

9. SAVE CHANGES? – 

Select “yes” to save changes. Procedure advances to ZONE NUM

(Save?) (step 

1)