Russound CAV6.6 사용자 설명서

56

Procedure advances to DEVICE CODE (step 3)

3. DEVICE CODE – 

Source component code for IR control.

(DevCd)

4. KEY FUNCTION – 

Select a function (Play, Enter, etc.).

(KeyFn)

5. SAVE CHANGES? – 

Select “yes” to save the changes.

(Save?)

At this field it is necessary to enter the number of sources used in the CAV6.6 system (1 to 6). This
limits the sources displayed on the keypad in the normal running mode when the source button is
pressed, but also limits source selections in the configuration menus. 

NOTE: This procedure should be performed using the keypad installed in the zone to be configured.
See Installation Menu on Page 50 and Zone Setup - Flow Chart on page 67

Zone Setup allows the installer to adjust properties of the UNO Keypad controlled CAV6.6 zone. This
series of menus allows the system’s zones to be configured for these properties:

This feature allows the installer to adjust the output volume to 

(ZonVT)

each zone. -16 dB (lowest) to 0 dB (max)(default). 

This feature is either disabled or enabled. If disabled (default), an 

(SysOn)

All On command activated from another zone will not turn on the 
disabled zone. If enabled, an All On command activated from 
another zone will turn on the enabled zone. 

This feature is either disabled or enabled. If disabled, Party Mode 

(PtyEn)

activation from another zone will not affect the disabled zone. If 
enabled (default), the zone will participate with Party Mode. 

This feature is either disabled or enabled. If disabled, the zone 

(MstEn)

cannot host a master keypad during Party Mode. If enabled 
(default), the zone has the option of hosting the Master keypad.