Russound CAV6.6 사용자 설명서

54

Choose Learned IR if the pre-programmed IR code library does 

(LrnIR)

not support the source component.

Select the learned source bank to be assigned to the source 

(LnSrc)

component. Procedure advances to KEY FUNCTION (step 8)

The numeric IR Prefix command is cleared. Procedure advances 

(Unasg)

to SUFFIX CMD (step 9)

Default selects the same device type and device code previously

(Deflt)

setup in BASIC SETUP. Procedure advances to KEY FUNCTION 
(step 8)

i. MACRO - 

Macro loads a series of commands which are processed when 

(Macro)

activated.

ii. MACRO ID – 

Enter the macro ID number. Menu advances to SUFFIX CMD (step 9)

(MacID) 

Procedure advances to DEVICE CODE (step 7)

7. DEVICE CODE – 

Source component code for IR control.

(DevCd)

8. KEY FUNCTION – 

Select a function (Disc, etc.).

(KeyFn)

Tells the system whether a command will be issued after the 

(Sufix)

selection of the numerical value (e.g., 1, 2 

Enter). If “no,” proce-

dure advances to SAVE CHANGES (step 13)

10. COMMAND TYPE – 

Select the type of source command (e.g., CD, TV, etc.). 

(CmdTp)

Choose Learned IR if the pre-programmed IR code library does 

(LrnIR)

not support the source component.

Select the learned source bank to be assigned to the source 

(LnSrc)

component. Procedure advances to KEY FUNCTION (step 12)

The numeric IR Suffix command is cleared. Procedure advances

(Unasg)

to SOURCE NUM (step 1)

Default selects the same device type and device code previously

(Deflt)

setup in BASIC SETUP. Procedure advances to KEY FUNCTION 
(step 12)