Dynaudio SUB 600 사용자 설명서

To find the suitable position for the Sub 600 in your listening room, please read the 
chapter “Positioning the subwoofer” on page 20.

1. Unpack the subwoofer on a clean, even and soft area; floor carpeting is very suitable.
2. The packaging should be opened from the top. Remove all accessories that come 

packed with the subwoofer. Do not remove the top part of the protective material.

3. With the protective material still in place but with accessories removed, carefully tilt 

the packaging on its side and tilt again to turn it upside-down. Ensure that no part of 
the top-cover is obstructing the opening at the top.

4. The outer packaging can now be lifted away from the subwoofer itself. Remove the 

protective material that now is on top. Through the bag you can now see the 
underside of the subwoofer.

5. Open the bag and remove such from around the base of the subwoofer.
6. Again, carefully tilt the subwoofer on its side and again to turn it onto its feet. Note that 

the top part of the protective material will now come off easily so ensure that the 
subwoofer does not drop or slide away in the process.

• Subwoofer: The factory-set power requirements (refer to label on rear of subwoofer) 

should correspond for the region where the subwoofer was purchased. Refer also to 
chapter “Important Safety Instructions” on page 2.

• Front baffle grille
• AC mains lead. The supplied lead should be suitable for the region where the 

subwoofer was purchased.

• Owners Manual

1

2

3