Panasonic SC-HT870 사용자 설명서

RQT7429

[HT878] 

(Center speaker only)

 

[HT870] 

[HT520]

∫ Attaching to a wall

1 Drive a screw (not included) into a wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).

≥The wall or pillar on which the speakers are to be attached should be capable of 

supporting 10 k

g per screw. Consult a qualified building contractor when attaching the 

speakers to a wall. Improper attachment may result in damage to the wall and 
speakers.

[HT870]
≥When mounting the front and surround speaker to a wall, we recommend using a string (not included) to prevent it from falling (‹ page 5).
≥Use of optional speaker cables are recommended for wall-mounted front and surround speakers. (You can also remove the speaker cables 

from the pipes supplied with this system.)

∫ Fitting speaker stands

 (not included)

[HT878] [HT870] (Center speaker only)

[HT520]

Ensure the stands meet these conditions before purchasing them.
Observe the diameter and length of the screws and the distance between screws as shown in the diagram.
≥The stands must be able to support over 10 kg.
≥The stands must be stable even if the speakers are in a high position.

e.g. 

[HT520]

 Front speaker

Wall or pillar

230 mm

[HT870]

[HT878]

86 mm

So that the speaker fits up against the wall squarely, be 
sure to press the speaker cable down into the groove.

[HT520]

[HT870]

150 mm

270 mm

In this position, the 
speaker will likely 
fall if moved to the 
left or right.

Move the speaker so 
that the screw is in 
this position.

Attach the stands to 
these metal screw 
holes.

Plate thickness 
plus 7 to 10 mm

5 mm, pitch 0.8 mm 

60 mm

Speaker stand 
(not included)

7429en-p03-30.fm  7 ページ  ２００４年３月５日　金曜日　午後８時１０分