Fujitsu RX100 S2 사용자 설명서

194

Chapter 8  Hardware Configuration/Utilities

8.2.2 Main Menu

The [Main] menu window is initially displayed when you start the BIOS Setup Utility.

Settings for time and date and for the drives are configured in the [Main] menu window.

table: Items on the Main Menu

Item

Setting

Description

System Time

Present time

The system time is set in "hours:minutes:seconds" 
format. The hours should be based on a 24-hour 
clock.
For example, 6:30:00 P.M. is set as "18", "30", 
"00".

Note: 
 Repeat the procedure until the correct time 

is set.

 

If a highly precise system time is necessary, 

install a network synchronized time system 

(NTP, etc.).

System Date

Present date

The system date is set in "month:day:year" format.
For example, August 20, 2005 is set as "08", "20", 
"2005".

Diskette A

1.44/1.25MB 3 1/2"

 

(Fixed parameter)

Specifies the type of floppy disk drive A (recording 
density and drive size).

Parallel ATA

[Enter]

Sets the type and operating mode for the connected 
internal hard disk unit.

 

SATA Port 0

[Enter]

This server does not use this port.

SATA Port 1

[Enter]

Boot Options

[Enter]

Sets system startup options.
"8.2.4 Boot Options Submenu" (pg.197)

Base Memory

 -

Available base memory size of up to 1MB is 
displayed.

Extended Memory

 -

Memory size of 1MB or more is displayed.