Fujitsu RX100 S2 사용자 설명서

195

PRIMERGY RX100 S2 User’s Guide    

8

Hardw

a

re Config

uration/Utili

ties

8.2.3 Parallel ATA Submenu

Appears when [Parallel ATA] is selected from the [Main] menu. 

 

Sets the type and operating mode for the connected internal hard disk unit.

table: Items on the Parallel ATA Submenu

Item

Setting

Description

Type

Auto (Fixed parameter)

Sets the type of the IDE device.

Note: 
 If the value is set to [None], the next menu is 

not displayed.

CHS Format, Cylinders, 
Heads, Sectors, Maximum 
Capacity

 -

Displays or sets the number of cylinders, number of 
heads, number of sectors, and the maximum 
capacity detected by the server.
Those items are displayed if [Type] is set to [User].

LBA Format, 

 

Total Sectors, 

 

Maximum Capacity

 -

Displays or sets the total number of sectors and the 
maximum capacity of the disk detected by the 
server.
Those items are displayed if [Type] is set to [User].

Transfers Mode

 - (Fixed parameter)

When [Type] is set to [Auto], displays the number 
of sectors to transfer at once detected by the server.
Sets the number of sectors to transfer at once if 
[Type] is set to [CD-ROM], [Other ATAPI], 
[ATAPI Removable], [IDE Removable] or [User].
The disk access speed increases if a larger number 
of sectors is specified to transfer simultaneously.

LBA Translation

 - (Fixed parameter)

Sets whether to enable or disable the Logical Block 
Addressing (LBA: access based on logical serial 
numbers).
When [Type] is set to [Auto], the current settings 
appear.
It can be set when [Type] is set to [CD-ROM], 
[Other ATAPI], [ATAPI Removable], [IDE 
Removable] or [User].