JVC KD-S747 사용자 설명서
7
ENGLISH
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or
manual searching to tune in to a particular
station.
manual searching to tune in to a particular
station.
Searching a station automatically:
Auto search
Auto search
1
Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
button, the band changes as
follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is
received, press the same button you have
pressed for searching.
received, press the same button you have
pressed for searching.
Note:
FM1 and FM2: 87.5 MHz – 108.0 MHz
FM1 and FM2: 87.5 MHz – 108.0 MHz
FM3: 65.00 MHz – 74.00 MHz
Searching a station manually:
Manual search
Manual search
1
Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
button, the band changes as
follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Press and hold
¢
or
4
until “M” (manual) starts flashing on
the display.
the display.
To search stations of
higher frequencies
higher frequencies
To search stations of lower
frequencies
frequencies
Selected band appears.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
broadcast with sufficient signal strength.
FM1
FM2
FM3
AM
FM1
FM2
FM3
AM
CONTINUED ON THE NEXT PAGE
EN07-09_KD-S747[EE]f.p65
1/9/03, 6:06 PM
7