JVC KD-S747 사용자 설명서
8
ENGLISH
To tune in to stations of
lower frequencies
lower frequencies
To tune in to stations of
higher frequencies
higher frequencies
Storing stations in memory
You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
band (FM1, FM2, and FM3).
1
Select the FM band (FM1 – 3) you
want to store FM stations into.
want to store FM stations into.
Each time you press the
button, the band changes as
follows:
button, the band changes as
follows:
2
Press and hold both buttons for
more than 2 seconds.
more than 2 seconds.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2, or FM3).
These stations are preset in the number
buttons—No.1 (lowest frequency) to No.6
(highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
searched and stored automatically in the band
number you have selected (FM1, FM2, or FM3).
These stations are preset in the number
buttons—No.1 (lowest frequency) to No.6
(highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
MO (monaural) indicator
“- -SSM- -” appears, then disappears when
automatic preset is over.
automatic preset is over.
FM1
FM2
FM3
AM
3
Tune in to a station you want while
“M” (manual) is flashing.
“M” (manual) is flashing.
• If you release your finger from the button,
the manual mode will automatically turns
off after 5 seconds.
off after 5 seconds.
• If you hold down the button, the frequency
keeps changing—in 50 kHz intervals
(87.5 MHz — 108.0 MHz for FM 1 and FM
2), in 30 kHz intervals (65.00 MHz — 74.00
MHz for FM 3) and 9 kHz for AM—MW/LW
until you release the button.
(87.5 MHz — 108.0 MHz for FM 1 and FM
2), in 30 kHz intervals (65.00 MHz — 74.00
MHz for FM 3) and 9 kHz for AM—MW/LW
until you release the button.
When an FM stereo broadcast is hard to
receive:
receive:
1
Press M (MODE) to enter the
functions mode while listening
to an FM stereo broadcast.
functions mode while listening
to an FM stereo broadcast.
2
Press MO (monaural), while
still in the functions mode, so
that the MO indicator lights up
on the display.
Each time you press the
button, the MO indicator lights
up and goes off alternately.
still in the functions mode, so
that the MO indicator lights up
on the display.
Each time you press the
button, the MO indicator lights
up and goes off alternately.
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved.
sound you hear becomes monaural but the
reception will be improved.
EN07-09_KD-S747[EE]f.p65
1/19/03, 9:24 AM
8