JVC LST0420-001B 사용자 설명서
26
Adjusting Image
䡵 TK-C215V12 (continued)
Registering alarm position
Registering alarm position
For registering the angle of view during
monitoring when there is an alarm input.
monitoring when there is an alarm input.
1.
Check that the [ALARM POSITION]
indicator light is turned on.
Registration of alarm position is enabled.
indicator light is turned on.
Registration of alarm position is enabled.
● Press the [POSITION SELECT] button if the
[ALARM POSITION] indicator light is off.
2.
Adjust the image size. (
3.
Press the [MEMORY] button for 2 seconds
or longer.
The [ALARM POSITION] indicator light blinks
for 3 times (green)
or longer.
The [ALARM POSITION] indicator light blinks
for 3 times (green)
ALARM position registration is completed
4.
Adjust the brightness. (
5.
Press the [POSITION SELECT] button.
The camera returns to the home position
The camera returns to the home position
NOTE:
● Be sure to return the camera to the home
position after registration of the alarm position
is completed.
In addition to pressing the [POSITION
SELECT] button, you can also use the power
ON/OFF button to return the camera to the
home position.
is completed.
In addition to pressing the [POSITION
SELECT] button, you can also use the power
ON/OFF button to return the camera to the
home position.
● To check images at the registered home
position or alarm position, press the
[POSITION SELECT] button. Press this
button to switch between the image at the
home and alarm positions.
[POSITION SELECT] button. Press this
button to switch between the image at the
home and alarm positions.
Adjusting Images
(continued)
(continued)
佧
B
RESET/[SPOT]
LL
PHASE
R
WHT.BAL.
H
L
IRIS
LEVEL
ZOOM/FOCUS
FAR
WIDE
NEAR
POSITION SELECT
POSITION
ALARM
[MEMORY]
2
4
1
2
3
4
5
6
7
8
TELE
4.
1.,5.
2.,3.
TK-C215V4_V12_EN.book Page 26 Wednesday, August 2, 2006 1:18 PM