JVC LST0420-001B 사용자 설명서
27
Other installation and adjustment
After setting is complete, mount the Inner dome.
1.
Mount the inner dome .
Mount the inner dome to the claws (3 locations).
Mount the inner dome to the claws (3 locations).
CAUTION:
● Mount the inner dome such that it does not
cover the lens.
● When mounting the inner dome, be careful
not to move the lens position. The image
angle set previously will go out of
alignment.
angle set previously will go out of
alignment.
After setting is complete, mount the dome cover.
1.
Mount the dome cover.
Align the position marks on the camera unit
and dome cover, followed by pressing in
directly to mount the cover.
Align the position marks on the camera unit
and dome cover, followed by pressing in
directly to mount the cover.
CAUTION:
Press the dome over until a “click” sound is
heard. Check that the cover is firmly mounted.
Failure to mount the cover firmly may cause
this cover to fall off.
heard. Check that the cover is firmly mounted.
Failure to mount the cover firmly may cause
this cover to fall off.
Mounting the Inner Dome
Claws (3 locations)
Inner Dome
*TK-C215V4 is used in the above illustration.
Mounting the Dome Cover
1.
Position mark
TK-C215V4_V12_EN.book Page 27 Wednesday, August 2, 2006 1:18 PM