Echo PB-755S T 사용자 설명서

Level 2.

Parts Required:   Repower

TM  

Tune Up Kit  

Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada) 

otherwise severe engine damage may occur.

  1.  Remove spark plug and check for fouling, worn and rounded  

center electrode.

  2.  Clean the plug or replace with a new one.  DO NOT sand blast to  

clean. Remaining sand will damage engine.

  3.  Adjust spark plug gap by bending outer electrode.

  4.  Tighten spark plug to 150-170 kgf • cm (130-150 in • lbf).

Parts Required:   None, if you are careful.

IMPORTANT  

To maintain proper engine operating temperatures, cooling air 

must pass freely through the cylinder fin area. This flow of air 

carries combustion heat away from the engine.

Overheating and engine seizure can occur when:

•  Air intakes are blocked, preventing cooling air from reaching the  

cylinder.

•  Dust and grass build up on the outside of the cylinder. This build up  

insulates the engine and prevents the heat from leaving.

Removal of cooling passage blockages or cleaning of cooling fins is 

considered “Normal Maintenance.”  Any failure attributed to lack of 

maintenance is not warranted.

  1.  Remove accumulated debris from intake grill between backpack 

frame and blower housing.