Snapper 281222BE 사용자 설명서

 

 
2.4  STOPPING - ENGINE, WHEEL DRIVE, BLADE 

1.  Engage park brake by pushing clutch/brake pedal 
“DOWN” and moving the park brake latch to the 
“ENGAGED” position.  While holding the park brake 
latch “ENGAGED”, release clutch/brake pedal to set 
park brake. See Figure 2.16. 

 

 

 
2.  Release park brake by pushing down on the 
clutch/brake pedal, parking brake latch will move to 
the “OFF” position unassisted. See Figure 2.17. 

 

1.  Adjust cutting height as desired to any one of 
five positions using deck lift lever. Move deck lift 
lever up or down to desired cutting height and then 
move over to secure in the height of cut notch.    
See Figure 2.18.