Snapper 281222BE 사용자 설명서

 

 
2.6  REVERSE LOCKOUT MECHANISM 
 
Data indicates that tragic back-over accidents occur 
each year. These accidents usually involve 
unsupervised children. Many times these children have 
been given rides on the machine and have been trained 
to view this potentially dangerous piece of machinery as 
fun rather than being taught how to avoid danger. 
 
This riding mower has a Reverse Lockout Mechanism. 
This mechanism prevents the mower from being shifted 
into reverse with the blade running. To shift into reverse 
you must first stop the blade by releasing the blade 
pedals and then shift to reverse. It is our 
recommendation that this mechanism remain functional 
and the operator of this equipment develop the habit of 
never backing up with the blade running. As the Safety 
Instructions Indicate, DO NOT operate blades in 
reverse. STOP BLADES, LOOK AND SEE BEHIND 
AND DOWN for children, pets and hazards before 
and while backing. 
 
We realize that this could cause a change to your 
previous mowing method but we encourage you to 
adjust to this new system. Do not defeat the Reverse 
Lockout Mechanism. 
 
If you operate your mower near roadways or use 
attachments that require quicker shifting to reverse, 
there is an override lever provided. This lever can be 
pushed and held before starting the blade and will allow 
reverse operation until the blade pedals are released, at 
which time the system will return to its Reverse Lockout 
mode. This feature should never be selected unless you 
are absolutely sure that no children or others are 
present in the mowing area and that all children are 
away and supervised by a responsible adult. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

1.  Stop machine. Stop blade. 
2.  Depress and hold Override Lever. 
3.  Depress and hold Blade Pedals. Release 

Override Lever. 

4.  Move blade lever forward to “ON” position. 

 

 
IMPORTANT: DO NOT use the Reverse Lockout 
Mechanism Override as the normal operating mode. To 
return to the Reverse Lockout Mechanism mode, 
release blade pedals to turn blade off. The Override will 
reset to Reverse Lockout. Check the Reverse Lockout 
Mechanism frequently for proper function. With the 
blade pedals depressed, the shift lever must not go into 
reverse. DO NOT operate machine if Reverse Lockout 
Mechanism is not functioning properly. Contact your 
local Snapper dealer for assistance.