Husqvarna 210 C 사용자 설명서

 

18 - English

 

Tip! If, for reasons of space or for some other reason, 
it is not suitable to charge the mower where the loop 
generator/charger is positioned, a freestanding 
charger can also be used. A charger can be 
purchased as an accessory. Contact your dealer for 
further information.

 

1.

Position the loop generator/charger in a suitable spot.

2.

Connect the loop generator/charger's power cord 
to a 230 V wall socket. It is preferable to use an 
earth-fault breaker as recommended.

 

Automower is supplied with an uncharged battery. As 
soon as the loop generator/charger is connected, it is 
possible to charge the mower.

1.

Set the main switch to the 

 

 position.

2.

Connect the charger cable from the loop 
generator/charger to the charger contact on the 
mower. The green indicator lamp Battery should 
now be lit with a steady light. The indicator lamp 
goes out when the mower is fully charged. 

3.

From an uncharged state the battery takes about 
12 - 15 hours until it is fully charged.

Tip! Leave the mower connected to the charger 
cable when not in use. As long as the mower is 
connected it will be maintenance charged, which 
means the battery will be fully charged when the 
mower is used.

3012-784

3012-758