Husqvarna 210 C 사용자 설명서

 

22 - English

 

It is recommended to create a secondary area when 
the working area is made up of two areas that are 
joined by a passage where the distance between the 
boundary wires is less than 60 cm. Run the boundary 
wire then around the secondary area so that it forms 
an island outside of the main area. 

Automower must be moved manually between the 
main and secondary areas. 

Instead of forming an island with the boundary wire, it 
can be beneficial to use an extra loop 
generator/charger together with an extra boundary 
wire. A loop generator/charger can be purchased as 
an accessory. Contact your dealer for further 
information.

 

The boundary wire can be laid across a slope that 
slants less than 10 %.

The boundary wire should not be laid across a slope 
that is steeper than 10 %. There is a risk of 
Automower finding it difficult to turn, and being unable 
to move. The risk is at its greatest in damp weather 
conditions, as the wheels can slip on the wet grass.

However, the boundary wire can be laid across a 
slope steeper than 10 % when there is an obstacle 
that Automower can be permitted to collide with, for 
example, a fence or a dense hedge.

3012-682

Secondary 
area

Main area

3012-767

3012-768